Laman utama / Produk / RAEGuard 3 / Pengesan toksik & oksigen / D06J-0400-008
D06J-0400-008 is a RAEGuard 3 toxic/oxygen detector: RGD 3H2S. Gas —, range —, housing —, approval —.
| Segmen | Maksud | SKU ini |
|---|---|---|
| Prefix | D06 = RAEGuard 3 | D06 |
| ① Approval & housing | Other approval/config (selected) | J |
| ② Gas code | H₂S, 0–100 ppm (20–200 ppm) | 04 |
| ③ HART/relay | None | 0 |
| ④ Bluetooth | None | 0 |
| ⑤ Surge | None | 0 |
| ⑥ Gland | None | 0 |
| ⑦ Accessory kit | 8 | 8 |
| This SKU | RGD 3H2S | D06J-0400-008 |
| Keluarga | Pengesan toksik & oksigen |
|---|---|
| Gas | — |
| Julat | — |
| Perumah | — |
| Kelulusan | — |
| Pilihan | — |
| Output | 4–20 mA (+ Relay/HART opt.) |
| Principle | electrochemical |
| Penerangan | RGD 3H2S |
Choose D06J-0400-008 for — at —. Hot-swap electrochemical cartridges simplify gas change-outs.
D06J-0400-008 is a «Toxic & oxygen detectors» instrument. Pair with cal cap, magnetic wand, weather cover, smart sensors and PCB/housing spares (Parts family). Hub: product-29015.
WWTP, labs, semiconductor, cold-store ammonia, chlor-alkali, pharma and general toxic/O₂ monitoring.
| Nombor bahagian | Gas | Julat | Perumah | Kelulusan | Pilihan | Penerangan |
|---|---|---|---|---|---|---|
| D06A-0300-000 | O₂ | 0–25 %v/v | SS | ATEX | — | RGD 3.SS,ATX.O2.STD-ATX |
| D06A-0301-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXO2BLESTD-ATX |
| D06A-0310-000 | O₂ | 0–25 %v/v | SS | ATEX | Relay | RGD 3.SS,ATX.O2.RELAY.STD-ATX |
| D06A-0320-000 | O₂ | 0–25 %v/v | SS | ATEX | HART | RGD 3.SS,ATX.O2.HART.STD-ATX |
| D06A-0330-000 | O₂ | 0–25 %v/v | SS | ATEX | Relay+HART | RGD 3.SS,ATX.O2.RELAY+HART.STD-ATX |
| D06A-0331-000 | — | — | SS | ATEX | BLE+Relay+HART | RGD 3SS,ATXO2R+HBLESTD-ATX |
| D06A-0400-000 | H₂S | — | SS | ATEX | — | RGD 3.SS,ATX.H2S.STD-ATX |
| D06A-0401-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXH2SBLESTD-ATX |
| D06A-0410-000 | H₂S | — | SS | ATEX | Relay | RGD 3.SS,ATX.H2S.RELAY.STD-ATX |
| D06A-0420-000 | H₂S | — | SS | ATEX | HART | RGD 3.SS,ATX.H2S.HART.STD-ATX |
| D06A-0420-100 | H₂S | — | SS | ATEX | HART+SPD | RGD 3.SS,ATX.H2S.HART.SPD.STD-ATX |
| D06A-0430-000 | H₂S | — | SS | ATEX | Relay+HART | RGD 3.SS,ATX.H2S.RELAY+HART.STD-ATX |
| D06A-0430-100 | H₂S | — | SS | ATEX | Relay+HART+SPD | RGD 3.SS,ATX.H2S.R+H.SPD.STD-ATX |
| D06A-0431-000 | — | — | SS | ATEX | BLE+Relay+HART | RGD 3SS,ATXH2SR+HBLESTD-ATX |
| D06A-0500-000 | CO | — | SS | ATEX | — | RGD 3.SS,ATX.CO.STD-ATX |
| D06A-0501-000 | — | — | SS | ATEX | BLE | RGD 3SS,ATXCOBLESTD-ATX |
| D06A-0510-000 | CO | — | SS | ATEX | Relay | RGD 3.SS,ATX.CO.RELAY.STD-ATX |
| D06A-0520-000 | CO | — | SS | ATEX | HART | RGD 3.SS,ATX.CO.HART.STD-ATX |
Orient the sensor per the manual; calibrate with the correct gas. Replace the smart cartridge when due — do not open the cell.
Stock is lot-based. Quote the full P/N D06J-0400-008, gas/range and approval. If short, pick from the family matrix — do not substitute a look-alike SKU.