Honeywell XNX XNX-UTSV-RNIV1 – MPD IR methane 0–100 %LEL, mV, UL, 316SS, 3/4" NPT
XNX-UTSV-RNIV1 is a factory-configured Honeywell XNX with MPD infrared methane 0–100 %LEL, mV personality, UL / cUL, 4 × 3/4" NPT, 316 stainless steel, 3 relays + 4–20 mA HART, no local HART port. It is the SKU for gas-transmission compounds and biogas roofs where catalytic poison or oxygen-free streams rule out CB1.
Same sensor, swap enclosure/approval: aluminium XNX-UTAV-RNIV1, 316SS XNX-UTSV-RNIV1, other approval XNX-AMSV-RNIV1. XNX-UTAV-RNIV1 · XNX-UTSV-RNIV1 · XNX-AMSV-RNIV1
Part-number decode
| Segment | Meaning | This SKU |
|---|---|---|
| XNX | Honeywell XNX universal transmitter | XNX |
| A / U | Approval A=ATEX/IECEx; U=UL/cUL | U |
| M / T | Entry M=M25; T=3/4" NPT | T |
| A / S | Enclosure A=aluminium; S=316SS | S |
| V / I / E | Personality V=mV(MPD); I=IR Optima/Excel; E=EC | V |
| N / R / M / F | Option N=HART only; R=relays; M=Modbus; F=FFB | R |
| N / H | Local HART port N=no; H=yes | N |
| IV1 | MPD IR methane 0–100 %LEL | IV1 |
Same sensor, swap enclosure/approval: aluminium XNX-UTAV-RNIV1, 316SS XNX-UTSV-RNIV1, other approval XNX-AMSV-RNIV1.
Technical specifications
| Category | Transmitter Configured |
|---|---|
| Personality | mV personality (MPD catalytic / MPD IR) |
| Sensor / range | MPD IR methane 0–100 %LEL |
| Target | CH₄ / methane |
| Principle | MPD infrared (methane) |
| Output | 3 relays + 4–20 mA HART |
| Local HART | no local HART port |
| Supply | 16–32 VDC (24 VDC nominal) |
| Enclosure | 316 stainless steel |
| Entries | 4 × 3/4" NPT |
| Display | Backlit LCD, magnetic-wand menus |
| Ingress | IP66 |
| Approvals | UL / cUL |
| Temperature | −40~+65 ℃ |
| Mass | approx. 5.0 kg |
| Mates with | Honeywell MPD catalytic bead or MPD infrared sensors |
Why this personality / sensor
Methane is lighter than air and rises to roof vents. Dual-beam MPD IR does not need oxygen and ignores silicones. Mount high, under eaves or at the compressor-hall ridge, and keep the optical window out of wash-down.
Personality and replaceable parts
XNX-UTSV-RNIV1 uses the mV personality (MPD catalytic / MPD IR) board and mates with Honeywell MPD catalytic bead or MPD infrared sensors. Factory-fitted with MPD IR methane 0–100 %LEL. Spares live on product-3991. Do not substitute Sensepoint XCD cartridges on XNX.
Typical applications
City-gate stations, LNG boil-off rooms and anaerobic-digester roofs need a methane-specific IR point. XNX holds the trip while operators stay outside the classified shed.
Selection contrast
| P/N | Gas | Range | Option | Body |
|---|---|---|---|---|
| XNX-UTAV-RNIV1 | CH₄ | 0–100 %LEL | Relays | Aluminium |
| XNX-AMSV-RNIV1 | CH₄ | 0–100 %LEL | Relays | 316SS |
| XNX-UTSV-RNCB1 | LEL | 0–100 %LEL | Relays | 316SS |
| XNX-UTSV-RNIF1 | C₃H₈ | 0–100 %LEL | Relays | 316SS |
| XNX-UTSV-RNIC1 | CO₂ | 0–5 %v/v | Relays | 316SS |
| XNX-UTSV-RNNNN | body | — | Relays | 316SS |
| XNX-UTSV-NNIV1 | CH₄ | 0–100 %LEL | HART | 316SS |
Installation and wiring
Wall-mount XNX-UTSV-RNIV1 (316 stainless steel, approx. 5.0 kg) on a rigid stand sized for that mass. This SKU uses 4 × 3/4" NPT entries—glands must match; do not retap XNX-UTSV-RNIV1. Land XNX-UTSV-RNIV1 4–20 mA HART per the loop drawing; relays/Modbus/FFB exist only on the matching option board. Magnetic-wand menus on the XNX-UTSV-RNIV1 lid stay non-intrusive. Park the XNX-UTSV-RNIV1 methane IR at the ridge and out of wash-down.
FAQ
- Does the XNX-UTSV-RNIV1 IR cell see propane?
- Poorly. Propane has its own IF1 SKU. Do not substitute XNX-UTSV-RNIV1 on an LPG skid.
- Why not use catalytic CB1 instead of XNX-UTSV-RNIV1 for methane?
- If the stream can be inert or silicone-contaminated, the pellistor goes to sleep. XNX-UTSV-RNIV1 IR keeps working at 0 % oxygen.
- Why is XNX-UTSV-RNIV1 316SS instead of aluminium?
- XNX-UTSV-RNIV1 is the marine/sour-service body (~5 kg). Inland dry rooms can take aluminium sibling XNX-UTAV-RNIV1 and save mass on the bracket.
- Why is XNX-UTSV-RNIV1 NPT instead of M25?
- XNX-UTSV-RNIV1 is the UL/cUL body and ships 3/4" NPT. Do not tap M25 on this lid—order ATEX sibling XNX-AMSV-RNIV1 if metric glands are mandatory.
- What do the three relays on XNX-UTSV-RNIV1 do?
- XNX-UTSV-RNIV1 adds three configurable relays on top of 4–20 mA HART—typically A1/A2/fault. It is not Modbus; bus siblings are XNX-UTSV-MNIV1 / XNX-UTSV-FNIV1.
Documents
Honeywell XNX datasheet / manual · On-site XNX selection matrix
Availability and enquiry
Stock is lot-based. If this box is out, jump to 316SS XNX-UTSV-RNIV1 or UL XNX-UTSV-RNIV1 rather than a dead SKU.